Alkaline Extraction of Hemicelluloses from Aspen Chips and Its Impact on Subsequent Kraft Pulping, 2007 Engineering, Pulping & Environmental Conference

Please Note: This document will be available in PDF format in the "My Electronic Documents" link on the home page once your order has been completed. Please make sure you have the latest version of Acrobat Reader. Click on the Acrobat Reader icon to check for the latest version, it’s FREE. To print a hardcopy of a PDF file correctly you must have a postscript printer. If you are not sure if your printer is a postscript printer please refer to your owner’s manual.

A mild alkaline treatment was applied to aspen chips prior to Kraft pulping in order to extract hemicelluloses for utilization as biofuels. The extraction was performed at 50-90 oC, hence not requiring costly pressurized reaction vessels. It resulted in a recovery of 40-50 kg of hemicellulose per tonne of chips, and gave same pulp yield after subsequent pulping of the extracted chips residue as compared to a control cook. The pre-extraction process requires careful optimization of the pulping process, and allows shorter cooking time and lower chemical charges. Kraft pulps obtained from pre-extracted chips have a slightly higher cellulose/hemicellulose ratio, and demonstrate a small decrease in tensile index (~10%), but an improved brightness and shive content. While the hemicellulose yield for this process is low, this problem is outweighed by the fact that pulp properties and pulping yield can be maintained at a high level. The recovered hemicellulose can be concentrated/isolated more easily than furfural-containing smaller fragments obtained by autohydrolysis or dilute-acid treatment.