High-Temperature Bleaching of Mechanical Pulps from Spruce, 2007 International Mechanical Pulping Conference, 2007 International Mechanical Pulping Conference

Please Note: This document will be available in PDF format in the "My Electronic Documents" link on the home page once your order has been completed. Please make sure you have the latest version of Acrobat Reader. Click on the Acrobat Reader icon to check for the latest version, it’s FREE. To print a hardcopy of a PDF file correctly you must have a postscript printer. If you are not sure if your printer is a postscript printer please refer to your owner’s manual.

High-temperature (HT)-peroxide bleaching of a thermomechanical pulp made of Norwegian spruce was investigated; to that end, one-stage reference bleaching at 70°C and one- and two-stage bleaching at 105°C at different total alkali charges (TAs) using a wing defibrator as a mixer were performed.

Two-stage HT peroxide bleaching produces a brighter pulp than one-stage HT peroxide bleaching does. The TA should be kept low (10–15 kg/t) and the total alkali/peroxide ratio should be low in the first stage to minimize the COD load and obtain higher residual peroxide. Increased TA does not improve brightness. The bleaching time in HT bleaching at 105°C can be short, since the maximum brightness is reached after only 2.5 min.