Development of Laboratory Wet Creping Method to Evaluate and Control Pulp Quality for Tissue, PaperCon 2014

Please Note: This document will be available in PDF format in the "My Electronic Documents" link on the home page once your order has been completed. Please make sure you have the latest version of Acrobat Reader. Click on the Acrobat Reader icon to check for the latest version, it’s FREE. To print a hardcopy of a PDF file correctly you must have a postscript printer. If you are not sure if your printer is a postscript printer please refer to your owner’s manual.

Purchase of electronic (downloadable) documents made at www.tappi.org by credit cards, followed by instant download CANNOT be cancelled. We do not offer refunds on electronic download documents.

The required properties of tissue paper including softness and liquid absorption are predominantly manipulated by the creping process, which cannot be simply produced in the laboratory. This causes problems in controlling the stock quality prepared using the various types of industrial pulps, and consequently affects the creping operation and tissue quality. Therefore, this research work had the objectives to develop a laboratory creping method and to apply it for the evaluation and control of the quality of the pulp raw materials used in industrial tissue production. The experiment consisted of the development of a laboratory wet creping method where the creping devices and the creping conditions including the basis weight of the base paper, the sheet dryness and the degrees of pulp refining were studied. The results showed that the developed wet creping method could produce crepes on laboratory sheets. The structures of the creped sheets were engineered to improve their softness and liquid absorption while typical laboratory sheets were not able to be so engineered. The tested pulps were found to produce significantly different responses to the laboratory wet creping dependent on their morphology and the mechanical treatments. The examination of industrial pulps found that eucalypt, bagasse, bamboo and deinking pulps needed to be manipulated using different refining levels and required optimization among their softness, liquid absorption and strength properties. The developed laboratory wet creping method could be used to evaluate the quality of pulp materials for tissue manufacture and could be applied to examine the development of pulp quality under refining related to the required properties of creped sheets.