Treating kraft mill extract using bipolar membrane electrodialysis for the production of acetic acid, TAPPI JOURNAL March 2016

Please Note: This document will be available in PDF format in the "My Electronic Documents" link on the home page once your order has been completed. Please make sure you have the latest version of Acrobat Reader. Click on the Acrobat Reader icon to check for the latest version, it’s FREE. To print a hardcopy of a PDF file correctly you must have a postscript printer. If you are not sure if your printer is a postscript printer please refer to your owner’s manual.

Purchase of electronic (downloadable) documents made at www.tappi.org by credit cards, followed by instant download CANNOT be cancelled. We do not offer refunds on electronic download documents.

ABSTRACT: The objective of this work was to determine the process conditions for converting sodium acetate, the major component of alkaline hardwood extract, into acetic acid and sodium hydroxide using bipolar membrane electrodialysis (BPMED). The effects of current density and sodium acetate concentration in the feed-salt solution were evaluated using synthetic sodium acetate solution in a feed and bleed mode. This mode of operation repre-sents semibatch processing and was useful for determining the current efficiencies, energy consumption, and other system parameters for the production of about 160 g/L of acetic acid; maximum achievable concentration of acetic acid in electrodialysis; and 30 g/L of sodium hydroxide, which is the concentration sufficient for the extraction of sodium acetate from hardwood.The feed and bleed mode experiments performed at 60 mA/cm² using 130 and 85 g/L sodium acetate as feed-salt solutions produced similar results, except for a small change in the amount of water transported into the acid and base compartments. The feed and bleed mode experiment performed at low current density of 40 mA/cm² using  50 g/L sodium acetate as feed-salt solution produced almost similar quantities of acetic acid and sodium hydroxide as those in the other feed and bleed mode experiments. However, the energy consumption and current efficiencies were lower than those for the experiments performed at the current density of 60 mA/cm².

Application: Recovery of acetic acid or acetate salt as a byproduct at kraft pulp mills will be of interest to scientists and engineers who are developing the biorefinery concept.