Unique steel belt press technology for development of high strength papers from HYP, 21TAPPICon Virtual

The dry strength properties of hot pressed moist paper improved as stiff high-yield pulp (HYP) fibers soften and the sheet density increased. Very high wet strength was also achieved without adding strengthening agents. This research focuses on a new hot-pressing methodology based on a steel belt-based pilot cylinder press with infrared heating. The heated steel belt transports the moist paper into the cylinder nip with two adjacent steel rollers with adjustable nip pressure. The temperature ranges up to 300°C, maximum speed is 5 m/min, maximum pulling force from the steel belt is 70 kN and the line load in the two press nips is 15 kN/m each. High peak pressures are possible due to the hard press nip between steel rolls and steel belt, allowing a good heat transfer to the paper. The long dwell time allows strained drying of the paper which results to high density and high wet strength. Paper samples from high-yield pulps were tested at different nip pressures, temperatures and machine speeds while the dry content was kept constant at about 63%. High nip pressure showed the largest effect on densification and dry strength. While high temperature and long dwell time seem to be most important in achieving high wet strength. 

TAPPI conference proceedings and presentations, technical papers, and publication articles provide technical and management data and solutions on topics covering the Pulp, Paper, Tissue, Corrugated Packaging, Flexible Packaging, Nanotechnology and Converting Industries.

Simply select the quantity, add to your cart and your conference paper, presentation or article will be available for immediate download.